1. Boot Camp Assistant, formly Bootcamp, is the official app to make Windows 10 bootable USB on Mac. Simply open the app and follow the prompted instructions to complete the task. Wait, why you are not recommending Bootcamp as subtitle says? Basically, Boot Camp is just a minimal prototype product.
  2. Mar 12, 2016  Installing Windows 10 on a Mac without Bootcamp. Installing Windows on a Mac should be a piece of cake with Bootcamp, but that rarely is the case. In fact, I would personally say that Boot Camp Assistant is one of the worst apps that comes with OS X and unlike the rest, it.
  1. Create Win 10 Usb On Mac Without Bootcamp Software
  2. Run Win 10 On Usb
  3. Create Win10 Usb On Mac Without Boot Campac Without Bootcamp

Mar 28, 2016  First of all, Andre, your guide is easily the best that I have seen for installing Windows 10 with Boot Camp. It is thorough, detailed, and understandable. Thanks for this contribution. The most important part of your advice in my case was to be sure to download the latest version of OS X and the Boot Camp drivers. That got me over the hurdle.

To troubleshoot an issue with Windows 10 (especially boot-related issues), it can be handy to boot to Windows 10 that is not installed on a Boot Camp partition. It is relatively straightforward to create a bootable USB Flash drive to boot to the Windows 10 installer, and then open up a DOS prompt for troubleshooting.

Create Win 10 Usb On Mac Without Bootcamp Software

What is needed

Make a windows 10 bootable usb on mac without bootcamp
  1. USB Flash drive (8 GB or larger recommended)
  2. Windows 10 Installer ISO for Windows 10


All the preparation is done in macOS on the Mac that is having an issue booting Windows. It is important to use this Mac since it will be used to identify the correct Windows drivers.

USB Flash Drive

The USB Flash drive must be formatted as exFAT.

  1. Insert an 8GB or larger flash drive into a USB port on the Mac
  2. In Disk Utility, format the Flash drive as exFAT. Quit Disk Utility after this operation completes.

Boot Camp Driver

Open Boot Camp Assistant in the Utilities folder, and download the current Windows Support Software from the Action menu. Save the Windows Support Software to your desktop or other location, but do not save directly to the USB Flash Drive.

Windows Install Media

Download the current install media from the Microsoft website. Windows is not going to be installed, but the install media will give access to the command line tools in Windows. Select the version of Windows that is closes to the version of Windows installed on the Mac (Windows 8, Windows 10). It does not matter what edition of Windows is used since Windows is not going to be installed.

Download and play Cooking Mama: Let's cook! On Windows PC with LDPlayer Android emulator. Use keyboard and mouse control to play Cooking Mama: Let's cook! Cooking mama emulator download. Cooking Mama PC GUIDE: BLUESTACKS EMULATOR TO DOWNLOAD Cooking Mama ON PC (WINDOWS) Step 1: Download Bluestacks 4; Step 2: Download Cooking Mama From Android GOOGLE PLAY STORE or iPhone APP STORE. Best Platform to Play Cooking Mama on PC: The quickest Android Gaming Platform for PC; Changing Your Computer into the Best Mobile Gaming Device. Hamburgers, pizza, ice cream, and more are all yours to be had with Cooking Mama. To have even more fun, play Cooking Mama on your PC or Mac using the free BlueStacks Android Emulator. This free tool for your computer or laptop allows your computer to run almost any Android app on the market. How to Download COOKING MAMA Let’s Cook ANDROID APP FOR PC for your PC: Step 1: Download the android emulator software Andy and it is available for free. Click here to download: Download. Step 2: Start the installation of Andy by clicking on the installer file you downloaded.

Create Recovery USB Flash Drive

To create the USB Flash drive, follow these steps:

  1. Mount the Windows ISO that was downloaded from Microsoft. To mount the ISO, double click on the ISO in the Finder.
  2. Drag all the files and folders from the mounted ISO to the USB Flash Drive.
  3. Drag the contents of the Windows Support Software to the USB Flash Drive.
  4. If there is not an AutoUnattend.xml at the top level of the drive (as shown below), download AutoUnattend.xml, unzip it, and add it to the drive. AutoUnattend.xml provides the location of the $WinPEDriver$ folder to load the drivers during boot.
  5. The 2018 MacBook Air (and potentially Macs after that) have cannot load the IntelMEI driver and give a “Windows Setup could not install one or more boot-critical drivers. To install Windows, make sure that the drivers are valid, and restart the installation”. On the USB Flash drive, open the $WinPEDriver$ and remove the IntelMEI folder.

Once the Flash drive has been created, it should look like this:

The $WinPEDriver$ folder is important because the $WinPEDriver$ folder contains the drivers for Windows to boot successfully from the USB Flash drive and the hardware on that Mac.

Boot from the USB Flash drive

To inject the drivers, the Mac must be booted from the USB Flash drive.

  1. Insert the USB Flash drive into an available USB port on the Mac
  2. Reboot while holding the option key.
  3. Select EFI volume in the startup selector.

If Windows does not boot from the USB Flash drive after showing the Windows logo, you may have to run the following command to tell the firmware to boot the windows installer from the USB flash drive. This has been observed on the late-2014 Mac Mini but may affect other models as well. To set the variable:

Run Win 10 On Usb

  1. Disable SIP by booting to the recovery partition.
  2. Boot back to macOS and open Terminal. Run the follow command and enter the admin password when prompted:

sudo nvram InstallWindowsUEFI=1

Create Win10 Usb On Mac Without Boot Campac Without Bootcamp

Insert the USB flash drive if it is not inserted, reboot, and select the EFI volume from the startup selector.

Note the InstallWindowsUEFI variable is cleared at each reboot, so you will to set it again if you do not select the USB Flash Drive.

Macworld’s buying adviceLittle Snitch 1.2.2 strikes a good balance between automatically blocking potential problems and letting users decide what connections to allow. /little-snitch-camera.html. This solution worked well. The company recommended that I configure Little Snitch to recognize a range of IP addresses, such as through But when I contacted tech support about the issue, I got a quick and friendly response explaining that sometimes the same hostname represents more than one numeric IP address—often to balance a number of requests at one time—and for safety’s sake, Little Snitch keeps track only by IP address (since hostnames might be too easy to spoof). It would have been nice to see a few more entries for common connections, but it’s very easy to approve connections for another Web browser (such as Camino) or your chat software.I was a bit surprised when Little Snitch asked me to approve connections that I had told it to allow forever (for instance, iDisk syncing).

Command Prompt and Mapped Drives

When Windows 10 starts up, it will prompt for installation of Windows 10. To open up a DOS window, press Fn-Shift-F10 (or just shift-F10) or click Repair Computer->Troubleshoot->Command Prompt (if available).

Once in the command prompt, there are usually 3 drive letters available: X, C, and D.

Create Win10 Usb On Mac Without Boot Camp
  • X: This is Windows that you are booted into in memory. The files from the boot.wim on the flash drive are copied to memory and then booted to.
  • C: Boot Camp partition
  • D: The USB Flash drive

Running Utilities

Within the Windows command prompt, you can run utilities on the Boot Camp partition.