1. C++ Declaring Global Variables

A variable is a name which is associated with a value that can be changed. For example when I write int num=20; here variable name is num which is associated with value 20, int is a data type that represents that this variable can hold integer values. We will cover the data types in the next tutorial. In this tutorial, we will discuss about variables.

Dec 12, 2019  A C program might contain more than one compilation unit. To declare an entity that is defined in a separate compilation unit, use the extern keyword. The information in the declaration is sufficient for the compiler, but if the definition of the entity cannot be found in the linking step, then the linker will raise an error.

Syntax of declaring a variable in C++

  • So, include cstdlib at the start of your program. In practical terms, this means typing string instead of std::string, cout instead of std::cout and so on. The string variable itself (in the example, the string variable is yourname) is declared with string.
  • When a variable is assigned a symbolic name like 'employeepayrollid,' the compiler or interpreter can work out where to store the variable in memory. Variable Types When you declare a variable in a program, you specify its type, which can be chosen from integral, floating point, decimal, boolean.
  • When we create variables we call this the variable declaration, and then when we set them for the first time, we call this the initialization. To declare a variable in C, we write the data-type that we want the variable to contain, followed by the variable's name, followed by a semicolon.

For example:

We can also write it like this:

Types of variables

Variables can be categorised based on their data type. For example, in the above example we have seen integer types variables. Following are the types of variables available in C++.

int: These type of of variables holds integer value.

char: holds character value like ‘c’, ‘F’, ‘B’, ‘p’, ‘q’ etc.

bool: holds boolean value true or false.

double: double-precision floating point value.

float: Single-precision floating point value.

Types of variables based on their scope

Before going further lets discuss what is scope first. When we discussed the Hello World Program, we have seen the curly braces in the program like this:

Any variable declared inside these curly braces have scope limited within these curly braces, if you declare a variable in main() function and try to use that variable outside main() function then you will get compilation error.

Now that we have understood what is scope. Lets move on to the types of variables based on the scope.

1. Global variable
2. Local variable

Global Variable

A variable declared outside of any function (including main as well) is called global variable. Global variables have their scope throughout the program, they can be accessed anywhere in the program, in the main, in the user defined function, anywhere.

Lets take an example to understand it:

Dev c free download - Google Chrome dev, Game Dev Tycoon Demo, HP ScanJet 5300c, and many more programs. Start programming for the iPhone, iPad and the Mac by learning Objective C the easy way. /dev-c-pour-mac.html. Dev Eject is a simple software to use Device Manger for Windows XP, that provides a lot of useful functions to control your removable media. Best DVD Ripping software for Mac designed for Mac OS X users. Dev-C for Mac. Dev-C for Mac OS X: Best alternatives Compare Dev-C for Mac with best handpicked alternatives, rate them and add your own ones. Eclipse Free. CodeBlocks Free.

Global variable example

Here we have a global variable myVar, that is declared outside of main. We have accessed the variable twice in the main() function without any issues.


Local variable

Local variables are declared inside the braces of any user defined function, main function, loops or any control statements(if, if-else etc) and have their scope limited inside those braces.

Local variable example

Compile time error, because we are trying to access the variable myVar outside of its scope. The scope of myVar is limited to the body of function myFuncn(), inside those braces.

Can global and local variable have same name in C++?

Lets see an example having same name global and local variable.


As you can see that when I changed the value of myVar in the main function, it only changed the value of global variable myVar because local variable myVar scope is limited to the function myFuncn().

The usefulness of the 'Hello World' programs shown in the previous chapter is rather questionable. We had to write several lines of code, compile them, and then execute the resulting program, just to obtain the result of a simple sentence written on the screen. It certainly would have been much faster to type the output sentence ourselves.
However, programming is not limited only to printing simple texts on the screen. In order to go a little further on and to become able to write programs that perform useful tasks that really save us work, we need to introduce the concept of variables.
Let's imagine that I ask you to remember the number 5, and then I ask you to also memorize the number 2 at the same time. You have just stored two different values in your memory (5 and 2). Now, if I ask you to add 1 to the first number I said, you should be retaining the numbers 6 (that is 5+1) and 2 in your memory. Then we could, for example, subtract these values and obtain 4 as result.
The whole process described above is a simile of what a computer can do with two variables. The same process can be expressed in C++ with the following set of statements:
Obviously, this is a very simple example, since we have only used two small integer values, but consider that your computer can store millions of numbers like these at the same time and conduct sophisticated mathematical operations with them.
We can now define variable as a portion of memory to store a value.
Each variable needs a name that identifies it and distinguishes it from the others. For example, in the previous code the variable names were a, b, and result, but we could have called the variables any names we could have come up with, as long as they were valid C++ identifiers.


A valid identifier is a sequence of one or more letters, digits, or underscore characters (_). Spaces, punctuation marks, and symbols cannot be part of an identifier. In addition, identifiers shall always begin with a letter. They can also begin with an underline character (_), but such identifiers are -on most cases- considered reserved for compiler-specific keywords or external identifiers, as well as identifiers containing two successive underscore characters anywhere. In no case can they begin with a digit.
C++ uses a number of keywords to identify operations and data descriptions; therefore, identifiers created by a programmer cannot match these keywords. The standard reserved keywords that cannot be used for programmer created identifiers are:
alignas, alignof, and, and_eq, asm, auto, bitand, bitor, bool, break, case, catch, char, char16_t, char32_t, class, compl, const, constexpr, const_cast, continue, decltype, default, delete, do, double, dynamic_cast, else, enum, explicit, export, extern, false, float, for, friend, goto, if, inline, int, long, mutable, namespace, new, noexcept, not, not_eq, nullptr, operator, or, or_eq, private, protected, public, register, reinterpret_cast, return, short, signed, sizeof, static, static_assert, static_cast, struct, switch, template, this, thread_local, throw, true, try, typedef, typeid, typename, union, unsigned, using, virtual, void, volatile, wchar_t, while, xor, xor_eq

Specific compilers may also have additional specific reserved keywords.
Very important: The C++ language is a 'case sensitive' language. That means that an identifier written in capital letters is not equivalent to another one with the same name but written in small letters. Thus, for example, the RESULT variable is not the same as the result variable or the Result variable. These are three different identifiers identifiying three different variables.

Fundamental data types

The values of variables are stored somewhere in an unspecified location in the computer memory as zeros and ones. Our program does not need to know the exact location where a variable is stored; it can simply refer to it by its name. What the program needs to be aware of is the kind of data stored in the variable. It's not the same to store a simple integer as it is to store a letter or a large floating-point number; even though they are all represented using zeros and ones, they are not interpreted in the same way, and in many cases, they don't occupy the same amount of memory.
Fundamental data types are basic types implemented directly by the language that represent the basic storage units supported natively by most systems. They can mainly be classified into:
  • Character types: They can represent a single character, such as 'A' or '$'. The most basic type is char, which is a one-byte character. Other types are also provided for wider characters.
  • Numerical integer types: They can store a whole number value, such as 7 or 1024. They exist in a variety of sizes, and can either be signed or unsigned, depending on whether they support negative values or not.
  • Floating-point types: They can represent real values, such as 3.14 or 0.01, with different levels of precision, depending on which of the three floating-point types is used.
  • Boolean type: The boolean type, known in C++ as bool, can only represent one of two states, true or false.
Here is the complete list of fundamental types in C++:
GroupType names*Notes on size / precision
Character typescharExactly one byte in size. At least 8 bits.
char16_tNot smaller than char. At least 16 bits.
char32_tNot smaller than char16_t. At least 32 bits.
wchar_tCan represent the largest supported character set.
Integer types (signed)signed charSame size as char. At least 8 bits.
signedshortintNot smaller than char. At least 16 bits.
signedintNot smaller than short. At least 16 bits.
signedlongintNot smaller than int. At least 32 bits.
signedlong longintNot smaller than long. At least 64 bits.
Integer types (unsigned)unsigned char(same size as their signed counterparts)
unsigned shortint
unsigned longint
unsigned long longint
Floating-point typesfloat
doublePrecision not less than float
long doublePrecision not less than double
Boolean typebool
Void typevoidno storage
Null pointerdecltype(nullptr)

* The names of certain integer types can be abbreviated without their signed and int components - only the part not in italics is required to identify the type, the part in italics is optional. I.e., signed short int can be abbreviated as signed short, short int, or simply short; they all identify the same fundamental type.
Within each of the groups above, the difference between types is only their size (i.e., how much they occupy in memory): the first type in each group is the smallest, and the last is the largest, with each type being at least as large as the one preceding it in the same group. Other than that, the types in a group have the same properties.
Note in the panel above that other than char (which has a size of exactly one byte), none of the fundamental types has a standard size specified (but a minimum size, at most). Therefore, the type is not required (and in many cases is not) exactly this minimum size. This does not mean that these types are of an undetermined size, but that there is no standard size across all compilers and machines; each compiler implementation may specify the sizes for these types that fit the best the architecture where the program is going to run. This rather generic size specification for types gives the C++ language a lot of flexibility to be adapted to work optimally in all kinds of platforms, both present and future.
Type sizes above are expressed in bits; the more bits a type has, the more distinct values it can represent, but at the same time, also consumes more space in memory:
SizeUnique representable valuesNotes
8-bit256= 28
16-bit65 536= 216
32-bit4 294 967 296= 232 (~4 billion)
64-bit18 446 744 073 709 551 616= 264 (~18 billion billion)

For integer types, having more representable values means that the range of values they can represent is greater; for example, a 16-bit unsigned integer would be able to represent 65536 distinct values in the range 0 to 65535, while its signed counterpart would be able to represent, on most cases, values between -32768 and 32767. Note that the range of positive values is approximately halved in signed types compared to unsigned types, due to the fact that one of the 16 bits is used for the sign; this is a relatively modest difference in range, and seldom justifies the use of unsigned types based purely on the range of positive values they can represent.
For floating-point types, the size affects their precision, by having more or less bits for their significant and exponent.
If the size or precision of the type is not a concern, then char, int, and double are typically selected to represent characters, integers, and floating-point values, respectively. The other types in their respective groups are only used in very particular cases.
The properties of fundamental types in a particular system and compiler implementation can be obtained by using the numeric_limits classes (see standard header '><limits>). If for some reason, types of specific sizes are needed, the library defines certain fixed-size type aliases in header '><cstdint>.
The types described above (characters, integers, floating-point, and boolean) are collectively known as arithmetic types. But two additional fundamental types exist: void, which identifies the lack of type; and the type nullptr, which is a special type of pointer. Both types will be discussed further in a coming chapter about pointers.
C++ supports a wide variety of types based on the fundamental types discussed above; these other types are known as compound data types, and are one of the main strengths of the C++ language. We will also see them in more detail in future chapters.

C++ Declaring Global Variables

Declaration of variables

C++ is a strongly-typed language, and requires every variable to be declared with its type before its first use. This informs the compiler the size to reserve in memory for the variable and how to interpret its value. The syntax to declare a new variable in C++ is straightforward: we simply write the type followed by the variable name (i.e., its identifier). For example:

These are two valid declarations of variables. The first one declares a variable of type int with the identifier a. The second one declares a variable of type float with the identifier mynumber. Once declared, the variables a and mynumber can be used within the rest of their scope in the program.
If declaring more than one variable of the same type, they can all be declared in a single statement by separating their identifiers with commas. For example:
This declares three variables (a, b and c), all of them of type int, and has exactly the same meaning as:

To see what variable declarations look like in action within a program, let's have a look at the entire C++ code of the example about your mental memory proposed at the beginning of this chapter:
Don't be worried if something else than the variable declarations themselves look a bit strange to you. Most of it will be explained in more detail in coming chapters.

Initialization of variables

When the variables in the example above are declared, they have an undetermined value until they are assigned a value for the first time. But it is possible for a variable to have a specific value from the moment it is declared. This is called the initialization of the variable.
In C++, there are three ways to initialize variables. They are all equivalent and are reminiscent of the evolution of the language over the years:
The first one, known as c-like initialization (because it is inherited from the C language), consists of appending an equal sign followed by the value to which the variable is initialized:
type identifier = initial_value;
For example, to declare a variable of type int called x and initialize it to a value of zero from the same moment it is declared, we can write:

A second method, known as constructor initialization (introduced by the C++ language), encloses the initial value between parentheses (()):
type identifier (initial_value);
For example:
Finally, a third method, known as uniform initialization, similar to the above, but using curly braces ({}) instead of parentheses (this was introduced by the revision of the C++ standard, in 2011):
type identifier {initial_value};
For example:

All three ways of initializing variables are valid and equivalent in C++.

Type deduction: auto and decltype

When a new variable is initialized, the compiler can figure out what the type of the variable is automatically by the initializer. For this, it suffices to use auto as the type specifier for the variable:

Here, bar is declared as having an auto type; therefore, the type of bar is the type of the value used to initialize it: in this case it uses the type of foo, which is int.
Variables that are not initialized can also make use of type deduction with the decltype specifier:
Here, bar is declared as having the same type as foo.
auto and decltype are powerful features recently added to the language. But the type deduction features they introduce are meant to be used either when the type cannot be obtained by other means or when using it improves code readability. The two examples above were likely neither of these use cases. In fact they probably decreased readability, since, when reading the code, one has to search for the type of foo to actually know the type of bar.

Introduction to strings

Fundamental types represent the most basic types handled by the machines where the code may run. But one of the major strengths of the C++ language is its rich set of compound types, of which the fundamental types are mere building blocks.
An example of compound type is the string class. Variables of this type are able to store sequences of characters, such as words or sentences. A very useful feature!
A first difference with fundamental data types is that in order to declare and use objects (variables) of this type, the program needs to include the header where the type is defined within the standard library (header <string>):

As you can see in the previous example, strings can be initialized with any valid string literal, just like numerical type variables can be initialized to any valid numerical literal. As with fundamental types, all initialization formats are valid with strings:
Strings can also perform all the other basic operations that fundamental data types can, like being declared without an initial value and change its value during execution:

Note: inserting the endl manipulator ends the line (printing a newline character and flushing the stream).
The string class is a compound type. As you can see in the example above, compound types are used in the same way as fundamental types: the same syntax is used to declare variables and to initialize them.
For more details on standard C++ strings, see the string class reference.
Structure of a program